4.8/5 · Trusted by 5,000+ DIYers
Amptern Spray Foam Insulation 12cans
Pro-grade insulation at a DIY price. Seal a whole room in one afternoon.
Why DIYers choose AMPTERN
- Seals drafts for goodClosed-cell foam expands into every crack, gap and rim joist, then cures solid.
- Keeps the heat (and the AC) insideR-7.4 at 2″ thick, so rooms stay warmer in winter and cooler in summer.
- Fire-rated peace of mindASTM E84 Class A, flame spread index 0.
- Everything in the box12 cans, pro spray gun, cleaner and full safety gear. No contractor needed.
Spray gun
Foam cleaner
Safety kitNot sure how many kits you need? Work it out in 10 seconds →
Try it risk-free for 30 days
Use it on your project. If you're not happy with the results, send it back for a full refund.
How we calculate
Each kit covers about 240 sq ft at 1 inch thick. A 2-inch layer uses twice as much foam. Estimates are a guide; ceilings and rough surfaces may need more.
Pro-Grade DIY Spray Foam Insulation Kits
NEW: AMPTERN™ Is Now Fire-Rated
Class A rated with a flame spread index of 0, so fire can't travel across the foam you spray.
Class A Fire Rated
Meets ASTM E84 standards, the highest fire safety classification available.
Flame Spread Index
Tested to ASTM E84. Zero is the best possible result.
Zero Flame Spread
Fire can't travel across the surface of AMPTERN™, the lowest score the test can produce.
Built for Code Compliance
Recognized by the International Building Code for residential and commercial use.
Where will you use it?
Tap your project to see typical coverage and how many cans to get.
Estimates use 240 sq ft per 12-can kit plus 10% for overspray. Use the calculator for your exact size.
Watch the foam seal the gap


-
1
Prep
Shake the can for 30 seconds, screw it onto the gun and clear dust from the gap.
-
2
Spray
Hold the nozzle in the gap and run a steady bead about one third full.
-
3
Expand
The foam grows to fill every void and pushes into cracks you can't see.
-
4
Cure
It sets firm and airtight. Trim the excess once it's fully cured.
Shake the can for 30 seconds, screw it onto the gun and clear dust from the gap.
- Storage Tanks
- Round Surfaces
- Doors
- Metal Garages
- Sarden Sheds
- Balconies
- Loggias
- Car Bodies & Trailers
- Nindow Slopes
- Jneven Surfaces
Fill every gap, secure every build
Their room held heat or cool air noticeably better.
Around doors, walls and rim joists.
Including first-time users.
Professional results, no contractor required.
Based on AMPTERN customer feedback.
GarageThis product exceeded my expectations. The quality is outstanding and I would highly recommend it to anyone.
Got questions? Just ask.
Everything you need to air-seal and insulate your space correctly, without contractor costs or complicated equipment.
Hi there! 👋 What would you like to know about the kit?
Each kit contains everything you need for a complete insulation job:
- 12× Spray Foam Insulation can (31.7oz / 900g)
- 1× Solvent-Based Gun Cleaner (14.1oz / 400g)
- 1× Professional Spray Gun
- 1×Protective Gloves
- 1×Fan Spray Nozzle
- 1×Cone Spray Nozzle
- 1×Extension nozzle
- 1×Protective Coverall
- 1×Safety Goggles
- 12×Disposable Foam Straw
Yes. The kit includes the spray gun, nozzles, gloves, goggles and coverall, and the 8 steps on this page walk you through it. Do a short test spray on cardboard first to get a feel for the flow, then work in thin passes.
Apply thin layers and give the foam time to expand before adding more. If you overfill a gap, let it cure fully, then trim the excess flush with a utility knife or saw. Cured foam can be cut, sanded and shaped.
It does not need to be spotless. Remove dust, grease and loose material, make sure the surface is dry, then lightly mist it with water for better adhesion.
Yes — most homeowners report a 5–10°F improvement after installation. The spray foam seals air leaks and helps keep heat out in summer and warmth in during winter.
No. When applied to a clean, properly prepared surface, AMPTERN™ foam cures into a rigid, permanent bond on wood, concrete, metal, and drywall.
To place an order, simply browse our products, add items to your cart, and proceed to checkout. You can review your order before finalizing your purchase.
After curing, the spray foam remains durable for decades without sagging or breaking down
Yes. Once fully cured, the foam can be trimmed with a serrated knife, sanded, or shaped to a smooth finish. For closed-cell foam, a coarse rasp or grinder works best.
Spray it onto uncured (fresh) PU foam, wait a moment, then wipe. It dissolves wet foam off your gun, surfaces, and tools. Use it after every job to keep the gun in top condition.
Yes. With proper cleaning between uses, the foam gun lasts for many cans and projects. Some users keep the gun threaded onto a partial can stored in a cool place — the foam stays usable for up to 30 days.
WHY TRUST US
MONEY-BACK GUARANTEE
Refunds available within 30 days
QUALITY PRODUCTS
Won't break for 10 years
DEDICATED SUPPORT
Real Humans. Real Help.
EASYTO USE
Tools for DIYers and professionals
